CRYSTAL QUEST® Refrigerator/In-line Fluoride Water Filter System
Product Description
CRYSTAL QUEST® Refrigerator/In-line Fluoride Water Filter System is designed for use on refrigerators with ice-makers and/or water through the door. It may be used with water fountains, water coolers, commercial coffee makers and ice machines as well. High-pressure quick-connect fittings can be used on either 1/4" o.d. copper or plastic tubing.
* It Contains Synthetic Aluminum Oxide absorbant media. Specifically designed to have a high affinity for Fluoride, Lead and Arsenic. It removes metals through a mixture of adsorption and chemical reaction with the media, therefore, the elimination is not reliant on ion exchange. It has uniform particle size, is physically stable and can be used over a wide pH range.
* Capacity is up to 11,000 ppm with effluent levels below 0.2 ppm from 10 ppm feed. Note: high pH and high bicarbonate levels reduce capacity - above 100 ppm bicarbonate, reduction by 50%; above 200 ppm, reduction by 75%.
* Dimensions: 5" x 16"
* Weight: 6 lbs
* Flow rate - .75 to 1 gallon per minute
* It Contains Synthetic Aluminum Oxide absorbant media. Specifically designed to have a high affinity for Fluoride, Lead and Arsenic. It removes metals through a mixture of adsorption and chemical reaction with the media, therefore, the elimination is not reliant on ion exchange. It has uniform particle size, is physically stable and can be used over a wide pH range.
* Capacity is up to 11,000 ppm with effluent levels below 0.2 ppm from 10 ppm feed. Note: high pH and high bicarbonate levels reduce capacity - above 100 ppm bicarbonate, reduction by 50%; above 200 ppm, reduction by 75%.
* Dimensions: 5" x 16"
* Weight: 6 lbs
* Flow rate - .75 to 1 gallon per minute
Accessories
* Contains fine-mesh pre-resin media in the unit to reduce fluorides below 0.5 ppm. Click here to learn more.
* Capacity is up to 11,000 ppm with effluent levels below 0.2 ppm from 10 ppm feed. Note: high pH and high bicarbonate levels reduce capacity - above 100 ppm bicarbonate, reduction by 50%; above 200 ppm, reduction by 75%. Also effectively removes lead and arsenic. Capacity (<100 ppm hardness): 1100 ppm Design flow rate: 0.25 GPM Maximum temperature: 100°F (38°C) Minimum temperature: 40°F (5°C) Maximum pressure: 125 PSI (8.6 bar) Minimum pressure: 20 PSI (1.4 bar) Micron rating: 25 nominal Materials of Construction • End Caps: Polypropylene • Inner/Outer Wraps: Polyolefin • Netting: Polyethylene • Gaskets: Buna-N $57.00 |
Check The Water Where You Live - CLICK HERE
- Refrigerator Water Filter
- Faucet Water Filter
- Reverse Osmosis - Reverse Osmosis Water Filters
- Shower Water Filter
- CounterTop Water Filter
- Under Sink Water Filter System
- Whole House Water Filter
- Pitcher Water Filter
- Ceramic Water Filter
- Ultraviolet Water Treatment Systems
- Water Cooler - Filtered Water Cooler
- Camping And Traveling Water Filter
- Fluoride Removal Water Filters
- Arsenic Removal Water Filters
- Water Softener
- Pet Water - Filtered Water Bowls
- Data Sheets
- Replacement Water Filter Cartridges And Parts
- Resources
- Warranty and Policies
